1 / 3
Koenigsegg CC850 Shifter Knob
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Two-part Koenigsegg-inspired shift knob: barrel-shaped wood-look knob with dark rings and Ghost emblem.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 1
- Wydruki
- 0
- Wyświetlenia
- 7
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Video Games
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Koenigsegg CC850 Shifter Knob. Unofficial fan design.
Print: Knob
Wood-look or matte PLA, dark filament for the rings (multicolor or filament change)
2 walls, 10 to 15 % infill (decorative part)
Print: Stem
PLA or PETG, 0.12 to 0.2 mm layers
4+ walls, 20 to 30 % infill (carries the load)
Supports: add if needed
Gluing
Both parts must be glued. Sand the contact surfaces lightly, clean them with isopropyl alcohol and use 2-component epoxy. Align the stem straight, clamp it and let it cure for 24 h.