1 / 3
Koenigsegg CC850 Shifter Knob — image 1
1 / 3

Koenigsegg CC850 Shifter Knob

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Two-part Koenigsegg-inspired shift knob: barrel-shaped wood-look knob with dark rings and Ghost emblem.

Rating
0 / 5
Likes
1
Downloads
1
Makes
0
Views
7
Reviews
0

Updated at source:

Model information

Category
Video Games
License
Creative Commons — Attribution — Noncommercial — Share Alike

Koenigsegg CC850 Shifter Knob. Unofficial fan design.

Print: Knob

  • Wood-look or matte PLA, dark filament for the rings (multicolor or filament change)

  • 2 walls, 10 to 15 % infill (decorative part)

Print: Stem

  • PLA or PETG, 0.12 to 0.2 mm layers

  • 4+ walls, 20 to 30 % infill (carries the load)

  • Supports: add if needed

Gluing
Both parts must be glued. Sand the contact surfaces lightly, clean them with isopropyl alcohol and use 2-component epoxy. Align the stem straight, clamp it and let it cure for 24 h.

Tags