MADOS 10mm Mini Block Light B - MADOS-20IB - Modular Building Block
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
MADOS 10x10x10mm modular block - uses MADOS Snap Fit Joints. Joint strength 0 (weakest) to 9 (strongest). MADOS-20IB
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 0
- Wydruki
- 0
- Wyświetlenia
- 7
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Public Domain
See more information on this Part at mados-20ib
0.2mm Recommended layer height
For best results, use Classic perimeter generator and one wall/perimeter on top and bottom layers.
Print the recommended STL file first. If the joint is too hard, go to a lower strength number setting, and if it's too weak, go to a higher setting.
This part uses Snap Fit Joints. Position the joints and then press firmly until they click into place.
The best Joint Strength can change depending on your Filament, the Part Design, and your personal preferences.
Search and filter through all parts at mados3d.com
MADOS is a building block system that uses a special kind of Joint that can be printed on any side of an object without needing support structures, making it more versatile than traditional Snap Fit joints, or dovetails.
MADOS always has a consistent internal (female) joint, but has many different kinds of external (male) joints to choose from. You can use Snap Fit, Twist, and Diagonal sliding joints all on the same internal joints. View the About page for more information mados3d.com/about
This building block system is completely open source and public domain under Creative Commons Zero, so you can use it without needing to give credit (although it’s always appreciated). View a simple breakdown of how licences work with this system at mados3d.com/licences