9-Minute Compact All-in-One 3D Printer Calibration Test – Only 1.8g
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A compact 1.8g printer calibration test with bridging, overhangs, stringing, and hole accuracy. Prints in just 9 minutes
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 49
- Wydruki
- 0
- Wyświetlenia
- 103
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Test Models
- Licencja
- Creative Commons — Attribution
9-Minute Compact All-in-One 3D Printer Calibration Test – Only 1.8g
🖨 Test your 3D printer in just 9 minutes using only 1.8 grams of filament!
Why waste hours and dozens of grams of filament when you can run a quick calibration test?
This compact, all-in-one model is designed for fast, affordable, and repeatable testing.
🔧 What Does It Test?
Bridging – Test how well your printer handles unsupported spans.
Overhangs – Check curved and straight overhang performance.
Stringing – Test unwanted filament strands between small pillars.
Hole Accuracy – Check how accurately your printer prints small holes.
Fine Details – See how well your printer handles tiny features.
Print Quality – Inspect layer consistency and surface finish.
⚙ Recommended Print Settings
Material: PLA
Layer height: 0.20 mm
Nozzle: 0.4 mm
Infill: 15%
Supports: None
Estimated print time: 9 minutes
Filament usage: 1.8 g
Size: Approximately 26.25 × 25 × 12 mm
Print time and filament usage are based on PrusaSlicer settings for the Prusa CORE One HF. Results may vary.
📁 Included Files
STL – Compatible with most slicers.
3MF – Ready-to-print PrusaSlicer project.
💡 Why Use This Test?
Change a printer setting,