1 / 3
9-Minute Compact All-in-One 3D Printer Calibration Test – Only 1.8g — image 1
1 / 3

9-Minute Compact All-in-One 3D Printer Calibration Test – Only 1.8g

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

A compact 1.8g printer calibration test with bridging, overhangs, stringing, and hole accuracy. Prints in just 9 minutes

Rating
0 / 5
Likes
2
Downloads
49
Makes
0
Views
103
Reviews
0

Updated at source:

Model information

Category
Test Models
License
Creative Commons — Attribution

9-Minute Compact All-in-One 3D Printer Calibration Test – Only 1.8g

🖨 Test your 3D printer in just 9 minutes using only 1.8 grams of filament!

Why waste hours and dozens of grams of filament when you can run a quick calibration test?

This compact, all-in-one model is designed for fast, affordable, and repeatable testing.

🔧 What Does It Test?

  • Bridging – Test how well your printer handles unsupported spans.

  • Overhangs – Check curved and straight overhang performance.

  • Stringing – Test unwanted filament strands between small pillars.

  • Hole Accuracy – Check how accurately your printer prints small holes.

  • Fine Details – See how well your printer handles tiny features.

  • Print Quality – Inspect layer consistency and surface finish.

⚙ Recommended Print Settings

  • Material: PLA

  • Layer height: 0.20 mm

  • Nozzle: 0.4 mm

  • Infill: 15%

  • Supports: None

  • Estimated print time: 9 minutes

  • Filament usage: 1.8 g

  • Size: Approximately 26.25 × 25 × 12 mm

Print time and filament usage are based on PrusaSlicer settings for the Prusa CORE One HF. Results may vary.

📁 Included Files

  • STL – Compatible with most slicers.

  • 3MF – Ready-to-print PrusaSlicer project.

💡 Why Use This Test?

Change a printer setting,

Tags