LED Remote for BTF RF14Keys with 10x3 magnets
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
LED remote holder using two 10x3 magnets sized to fit for model RF14Keys
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 0
- Wydruki
- 0
- Wyświetlenia
- 5
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
I remixed the original to fit the BTF 14Keys remote. The remote fits snugly into the holder and is mounted using two 10x3mm magnets. The magnet holes are also made smaller for the BTF version.
Printed in PETG, 0.15mm layer height, 0.4mm nozzle. Print in original orientation. This can be printed without supports, but the bottom inside will slightly suffer in appearance.
I've included the BTF 14Keys in 3mf and STL, as well as a fixed version of the original in 3mf and STL. If you're using the STL versions, you must Split to Parts, then change the magnet parts to Negative Volume for it to work. The 3mf files are good as is; adjust print settings as needed.
There are no notes included on the original post, but the original STL incorporates parts that need to be changed to negative volumes which don't show in STL files. But even then, the position of the magnet holes are too deep, and not creating holes. This has been fixed for the model attached.