1 / 5
Spacer for Rotor Conversion Kawasaki H1 H2 Z1 to Daytona 955i Brakes — zdjęcie 1
1 / 5

Spacer for Rotor Conversion Kawasaki H1 H2 Z1 to Daytona 955i Brakes

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Spacer to allow fitting of modern Triumph Daytona 955i rotor on a vintage Kawasaki!

Ocena
0 / 5
Polubienia
0
Pobrania
0
Wydruki
0
Wyświetlenia
5
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Automotive
Licencja
Creative Commons — Public Domain

About 

This model should not be used in production, only for mock-up. Plastic is not suitable for this purpose. 

I iterated on an old forum post, the actual design will vary from the drawing show in the pictures, and you may need to adjust further depending on your caliper choice. I have another model uploaded for Ninja 650 calipers. 

The speedometer may rub, my clearances were quite close!

USE AT YOUR OWN RISK

You will need to drill and Time-Sert the bolt holes to accept modern rotor bolts. (I used GSXR bolts)

Tagi