Liczymy pasujące modele…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
k vond dit en leek me leuk voor op printables
Supports: Yes Resolution: Dynamic Infill: 50% line Filament brand: 195 Filament material: PLA Once upon a time, in post-war Germany, there emerged a marvel of automotive engineering known as the Messerschmitt KR200. Designed by aircraft…
This is an adapter to allow the Garmin 955 to fit in the 22mm quick mount. The Epix and Fenix have a slightly larger pin spacing. I sliced a small piece of hot glue and heated it up to hold the 3d printed adapter in place.
This is a replacement part for Audi wiper arm nut cap, ID 1J0955205A. For reference, the maximum outer diameter is 22mm, and the smaller outer diameter is 20mm. Print instructions My used settings: Material : PETG Layer thickness : 0,2mm…
LEGO GMC 1955 APACHE 100
LEGO Chevrolet Corvette C1 1955
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
Print the drop-in support block out PETG (or any other plastic that will not bond to the plastic used for the main model) and insert before the upper surface starts printing. It should key in to the hex cutout as shown below. Print main…
When Disneyland opened in 1955, cast members were issued a metal badges with an employee number embossed on the front. The badges were used until 1962. Made of aluminum, the badges' shape is still mimicked by today's cast member nametags.…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
LEGO Toyota Land Cruiser 1955
This model is compatible with the lego system.
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
Cut in half for best results and strength
This model is compatible with the lego system.
Hi, I made a fridge magnet, Chevy 1955 long bed truck. Just slice the file and you will see all the color changes. Due to the variety of magnets, add the place on the magnet yourself as a negative volume. Insert it into the body about 0.4…
LEGO Mercedes W196 Monza 1955
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
Replacement for BMW 52 20 8099555 rear seat side bolster clip Designed for my e46 coupe after the clip broke when removing the bolster panel and I found how expensive a replacement clip was to obtain. Likely fits other e46 3 series, e53…
Garmin Forerunner 955 bike mount on stem
This model is compatible with the lego system.
This model is compatible with the lego system.
Gunsmoke - Marshal Matt Dillon (James Arness) - 1955-1975 3D printable model.
Gunsmoke - Deputy Marshal Festus Haggen (Ken Curtis) - 1955-1975 3D printable model.
Derived from @yawniek design. Designed for CMT 955.504.11 or 855.504.11 router bit but maybe work with other brand. Need three 3*2 neodym magnet. Print Settings Printer: Mzbot voron Rafts: No Supports: No Resolution: 0.20 Infill: 30%…
Cryolophosaurus is sometimes known as Elvisaurus because of the distinctive crest or "pompadour" that adorns the top of its head. The crest is similar to the pompadour hairstyles of the 50s, most notably that of Elvis Presley. This sort…
1955 Chevy Gasser, reduced to a small, clean object that keeps its main shape and character. Part of the Mini Cars collection — The model is simplified for a reliable print at a very small scale. Print tip: use a 0.2 mm nozzle for better…
Gunsmoke - Miss Kitty (Amanda Blake) - 1955-1974 3D printable model.
1955 Cadillac Fleetwood Series 60, reduced to a small, clean object that keeps its main shape and character. Part of the Mini Cars collection — The model is simplified for a reliable print at a very small scale. Print tip: use a 0.2 mm…
This model is compatible with the lego system.
osVAC suction adapter for Makita RT0700 Plunge Base 195563
PEUGEOT 203 PICKUP 1955
Gunsmoke - Doc (Hugh Milburn Stone) - 1955-1975 3D printable model.
This model is compatible with the lego system.
This is a temporary replacement cap / plug For 2018 Volkswagen Tiguan (May fit others models even Porsche!) Washer Fluid
El primer escudo del club de mis amores Instructions El tamaño estandar es de cerca de 10 cm con un relieve de 6 mm dividido en 2. Category: Sport & Outdoors
Have a look at the 3D model including texture on Sketchfab here . 3D model based on a 3D scan of a reconstruction of a dodo ( Raphus cucullatus ), the now extinct flightless bird which was endemic to the island of Mauritius. The first…
Captain Kangaroo - Captain (Bob Keeshan) - 1955-1984 3D printable model.
The Rolleicord V (1955) is a great companion and I use it often, but it lacks a cold shoe that can hold a light meter or a small flash. This became quite evident when the Reveni Labs light meter arrived, so I made one suitable to hold the…
An insert cupholder that clips into the standard center console for the Porsche Cayenne 955. For 12oz can. other variants in progress
Title says it all. The Garmin Quickfit Quarter-turn Bike Mount does not fit the garmin 955, so I made this model. I included the fusion 360 file.
1927 entered into history as the year of birth for the Mille Miglia, the famous 1,600 km racing course through Italy. By 1930, the name of Mercedes-Benz was closely bound up with this endurance race. And the first victory came in 1931 for…
Window adapter so that the camera is normal and the display is visible and the buttons can be operated!
General Pressing in CV axle seals can be challenging and if not pressed to the right depth or pressed in crooked, they will leak. Volvo used to make a special tool (9995541 or 999 5541), but it is hard to get and if you can get it, it's…
A pencil/pen vase to keep your favorite pens and pencils, or anything else, in. It is 110mm tall and 87mm for the x and y axis. The photo shows the vase printed in vase/spiralize mode with 1 wall and 3 bottom layers. The stl file is…
M3 Lee (1941-1955) Category: Vehicles
This is a replacement for plastic part of Bosch adjusting device 10009551 (for fruit pulping attachment). There are two Bosch fruit pulping attachment models that use this part : Fruit pulping attachment MUZ8FV1 , with Spare part: 0103…
This project is a custom-designed charging stand for the Garmin Forerunner 955, created with precision, usability, and aesthetics in mind. The stand is perfectly fitted to the shape of the watch, ensuring a secure and satisfying placement…
Iconic Movie Villains - The Night of the Hunter - Reverend Harry Powell - 1955
Remix of original grill to better match the standard 1955 chevy grill!
Washer tank lid adapter Changan UNI-S / CS55plus for VAG 6V0955485 Maybe it fits another model Changan Print in TPU 95A No PLA or PETG
Audi Q3 DPA 99551799802 Abdeckung, Scheinwerfer für AUDI Q3 (8UB, 8UG) - OEN 8U0955275E
I remixed @kenel_1095538 models. Most important i fixed all the sizes that didn't make sens
Ersatzteil / Spare Part
Slightly reinforced and remodelled from scratch to be able to print. PLA, 50% infill. Supports needed and included in gcode. The hole in the middle might require slight filing to sit perfectly on the axle.
This is a temporary replacement cap / plug For 2018 Volkswagen Tiguan (May fit others models even Porsche!) Washer Fluid fill. For reference the original part number is 3Q0955455. Category: Other
I need a pods for my van to contain the audio speakers, it doesn't have slots in the doors so I made pods for them. projected for Pioneer TS-A10955 4" only support YES material prusament Petg
Citroen DS 19 1955-1975 Racing
Mercedes Benz 300 SLR Uhlenhaut coupe 1955 Racing
This is a full-scale model of the Pencil Rocket, the first rocket developed in Japan by Prof. Itokawa of the University of Tokyo in 1955. For more information about the Pencil Rocket, please refer to the information in the attached URL.…
This model replaces the bolt hole and uses a 1/2" tool key compatible hole so you can use a 1/2" extension as the punch. Beware as always with plastic tools they can shatter, wear gloves and goggles to be safe. I have not yet tested the…
Replacement compartment lid, for replacing the shock absorbers of the trunk lid, Porsche Cayenne 955\957. I used ASA filament for printing OEM part number: 95551258300 95551258400
Facheinsätze für Workzone 95573 Aldi Allit Kleinteilemagazin 33 Fächer Version 1 - 28.11.2025 Video on YouTube: (Scroll down for the English version...) Hier findest du Facheinsätze für das "gelbe" Workzone Sortiermagazn von Aldi (Süd)…
This is a lamp base for the lampshade "Buble Lamp shade" by @CarlosAceves_395508. Needed parts: Printed parts: "Light diffusor" "Attachment plate" "Buble Lamp shade" by @CarlosAceves_395508 scaled according to the attached image "Base"…
Aston Martin DB2 4 MK II coupe 1955
This is designed to fit the small Rubbermaid recycling bin with SKU FG295573BLUE, often listed as 13 qt, 13.6 qt, 3.25 gal, 3.5 gal, or 4 gal (sold by Rubbermaid Commercial , Grainger , and others). The rim fits over the bag/liner on the…
Assembly This robot arm is designed to be assembled with heat-set inserts and screws. Hardware needed: ~15 × M2 heat-set inserts (used for all parts except the base) 3 × M3 heat-set inserts (for the base) M2 × 6 mm screws M3 × 6 mm screws…
Collection de sous-verre à partir des différents logo du FC Nantes de 1955 à 2019.
Špunty osy předního kola triumph sprint 955i. Front wheel axle plugs.
engine badge for triumph 955i/T509 (up to 2001) Machined out of aluminium, sprayed with engine paint and then carefully sanded down to reveal the raised sections. Part needs bent to match engine curve radius, I used a paddock stand and…
A replacement part for the bar that connects the flush handle to the plunger chain. I wanted to keep my metal handle, which had a tri-point connection fitting. This bar fits that specific handle. The inscription inside the metal handle…
replacement of a broken cap for an Ikea mug, avoiding to waste the whole mug. support needed for the part 2. after printing glue both parts (instant glue or epoxy as you prefer, i used instant glue as there is a large surface, so easy…
Headlight cover for Triumph Sprint RS 955i motorcycle
This is a snug not quite friction fit model that goes over the output shaft. The shaft is made from clear acrylic which is strong until it snaps, with that in mind this is snug but not ultra tight, i will be using a 2 part glue to join it…
Przedni ogranicznik prowadnicy kosza górnego do zmywarki do Samsung DW60M9550US/EO
Triumph 955i/T509 spacer use of this model is at your own risk
Free Tiger FT955 knife inset for this magnetic box.
I needed to compression test my John Deere 955 tractor but my compression kit only had ones that thread into the injector hole. The 955 uses a Yanmar 3TN84RJ which doesn’t have any threads on the injector. It relies on a metal bracket…
Edit to add: There's a ton of variations of this device, so if you figure out if this box fits your device, I'd really appreciate a comment with the type code or a picture. Most bins I found for my hair trimmer didn't fit the height of…
I created this to replace the disintegrating OEM rubber turn signal stalk on my 2003 Triumoh Tiger 955i. Cross referencing parts across bikes of the same era it will likely fit the following: Triumph Tiger 955i (1999, 2000, 2001, 2002,…
When using an LSL superbike kit on a 955i/T509 Speed Triple or converted Daytona the speedometer cable interferes with the headlight bracket. Solution is to return the dash to the original height. Additional benefit: fly screen sits lower…
Triumph Speed Triple 955i/T509 Headlight bracket. My bike came with the one from a 675/1050 which was too narrow. After measuring the bracket on the bike and looking at pictures I made this bracket that visually looks identical to the…
Custom and replacement foot guard for team metisse rear sets (mounted on 955i/T509 Speed triple) Also includes a copy of the original carbon fiber one it came with. Use of this part is entirely at your own risk.
This model is compatible with the lego system.
This model is compatible with the lego system.
Cryolophosaurus is sometimes known as Elvisaurus because of the distinctive crest or "pompadour" that adorns the top of its head. The crest is similar to the pompadour hairstyles of the 50s, most notably that of Elvis Presley. This sort…
A pencil/pen vase to keep your favorite pens and pencils, or anything else, in. It is 110mm tall and 87mm for the x and y axis. The photo shows the vase printed in vase/spiralize mode with 1 wall and 3 bottom layers. The stl file is…
If you want to get this template without subscribing, write me in chat! - SideSilhouette
A remix of FrAllard's Weather station now with a 955565 battery, a Fire Beetle 2 W/ Headers, and no M2 Inserts.
I really do love my automated house sprites! Even if they overlook some corners sometimes, I appreciate their regular work at home. Only one thing drives me mad: having just installed a new set of brushes, it happens that the Roomba…
Restore your Triumph Daytona to perfection or give it that clean, solo-rider look! Cracked, lost, or impossible-to-find original seat cowls are a common headache for Daytona owners. This high-precision 3D model, created from a scan of a…
Rebel Without a Cause - James Dean - 1955 3D printable model.
Gunsmoke - Deputy Marshal Festus Haggen (Ken Curtis) - 1955-1975 3D printable model.
Gunsmoke - Marshal Matt Dillon (James Arness) - 1955-1975 3D printable model.
Gunsmoke - Miss Kitty (Amanda Blake) - 1955-1974 3D printable model.
