Super thin fan adapter 92 to 80mm reduction
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a fan adapter that reduces from 92mm to 80mm and is only 5mm thick. I wanted to install an 80mm PC fan in the…
- Ocena
- 5 / 5
- Polubienia
- 20
- Pobrania
- 384
- Wydruki
- 0
- Wyświetlenia
- 1633
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Share Alike
This is a fan adapter that reduces from 92mm to 80mm and is only 5mm thick.
I wanted to install an 80mm PC fan in the rear of a pc case with provision for a 92mm fan, the adapter had to be as thin as possible. And since I only found adapters that apply very strongly (all with funnel / fan duct) I created my own.
This is actually already the whole story behind the adapter! :-D
Update - 2020-12-20 :
There has been a small update in which the print volume has been slightly reduced and also the hole spacing has been adjusted a little, see version 2. The changes are so minimal, that you can of course continue to use version 1.
PS: Also I have created an adapter from 120mm to 92mm in the meantime. :-)
Post-Printing
Category: Computer