ITEM 4040 Hinge
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
ITEM light 4040 Hinge This hinge for 4040 profiles was designed for a DIY laser cutter project. It easily connects two…
- Ocena
- 0 / 5
- Polubienia
- 143
- Pobrania
- 486
- Wydruki
- 0
- Wyświetlenia
- 2909
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial
ITEM light 4040 Hinge
This hinge for 4040 profiles was designed for a DIY laser cutter project.
It easily connects two ITEM profiles to each other, which can be attached with two M8 x 20mm inner square screws.
The joint can be rotated in a straight position 90° to the right & left. The screws can be used to regulate the effort needed to move the joint.
(+) very precise and form-fitting
(+) no twisting of the profiles
(+) high stability if the infill is increased accordingly
(-) only ITEM light profiles, otherwise all positive points will get worse
Print Settings
Printer Brand:
MakerBot
Printer:
MakerBot Replicator 2X
Rafts:
Doesn't Matter
Supports:
Yes
Resolution:
0,2 mm
Infill:
min 20%
Notes:
The hinge was printed in a resolution of 0.2mm to ensure the accuracy of the connection.
The infill was set to 20%, which has given a good stability, but can be increased as needed to get a higher stability.
Update
Due to the demand, I have supplemented the joint profile with an alternative fastening using slot nuts.
-> Joint with groove M3, two grooves & hole for thread
-> Joint with groove M3, four grooves & hole for thread
-> Joint with groove M3 & two grooves
-> Joint with groove M3 & four grooves
-> Joint with M4 groove, two grooves & hole for thread
-> Joint with M4 groove, four grooves & hole for thread
-> Joint with slot M4 & two slots
-> Joint with slot M4 & four slots
-> Joint with groove M5, two grooves & hole for thread
-> Joint with groove M5, four grooves & hole for thread
Category: Parts