ITEM 4040 Hinge
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
ITEM light 4040 Hinge This hinge for 4040 profiles was designed for a DIY laser cutter project. It easily connects two…
- Rating
- 0 / 5
- Likes
- 143
- Downloads
- 486
- Makes
- 0
- Views
- 2,909
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution — Noncommercial
ITEM light 4040 Hinge
This hinge for 4040 profiles was designed for a DIY laser cutter project.
It easily connects two ITEM profiles to each other, which can be attached with two M8 x 20mm inner square screws.
The joint can be rotated in a straight position 90° to the right & left. The screws can be used to regulate the effort needed to move the joint.
(+) very precise and form-fitting
(+) no twisting of the profiles
(+) high stability if the infill is increased accordingly
(-) only ITEM light profiles, otherwise all positive points will get worse
Print Settings
Printer Brand:
MakerBot
Printer:
MakerBot Replicator 2X
Rafts:
Doesn't Matter
Supports:
Yes
Resolution:
0,2 mm
Infill:
min 20%
Notes:
The hinge was printed in a resolution of 0.2mm to ensure the accuracy of the connection.
The infill was set to 20%, which has given a good stability, but can be increased as needed to get a higher stability.
Update
Due to the demand, I have supplemented the joint profile with an alternative fastening using slot nuts.
-> Joint with groove M3, two grooves & hole for thread
-> Joint with groove M3, four grooves & hole for thread
-> Joint with groove M3 & two grooves
-> Joint with groove M3 & four grooves
-> Joint with M4 groove, two grooves & hole for thread
-> Joint with M4 groove, four grooves & hole for thread
-> Joint with slot M4 & two slots
-> Joint with slot M4 & four slots
-> Joint with groove M5, two grooves & hole for thread
-> Joint with groove M5, four grooves & hole for thread
Category: Parts