1 1/4 inch Pipe Connector Cap
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
1 1/4 inch Cap with insert for panel mount RF connector
- Ocena
- 0 / 5
- Polubienia
- 13
- Pobrania
- 73
- Wydruki
- 0
- Wyświetlenia
- 705
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution
I designed this cap for a QHF (Quadrifilar Helix Antenna) antenna project to run the coax from the inside of a 1 1/4 schedule 40 PVC pipe.
I assume that any standard panel connector can be used with this pipe cover.
If you're interested in making your own QHF antenna, I suggest that you take a look at this website:
Print Settings
Printer Brand:
Prusa
Printer:
I3 MK3S
Rafts:
Doesn't Matter
Supports:
Doesn't Matter
Resolution:
0.30
Infill:
%10
Filament: eSUN PETG Solid Black
Notes:
I printed this with the connector side down with supports for the connector slot.
I screwed the connector with M3x8 and it's held with M3 washers and nuts.
It might be a tight fit so you might want to scale it a little.