1 / 2
Upgraded Fan Shroud 30mm from ProFab REMIX — zdjęcie 1
1 / 2

Upgraded Fan Shroud 30mm from ProFab REMIX

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Combined two designs from Profab for their upgraded fan to allow it to be used without the shroud. I printed it as a…

Ocena
0 / 5
Polubienia
7
Pobrania
23
Wydruki
0
Wyświetlenia
235
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Accessories
Licencja
Creative Commons — Attribution

Combined two designs from Profab for their upgraded fan to allow it to be used without the shroud. I printed it as a quick test in no name black PLA and covered the back of the part that touches the heatsink in kapton tape as a precaution. It has worked so well I never bothered printing it in a higher temp resistant material. Have had zero problems with it deforming. Have not experienced any heat creep within the hot end and can definitely feel and see the difference in airflow. Overall nice upgrade without having to slap a larger fan on it so far.

Two files uploaded. One is default orientation as it will be on the machine and the other is approx the angle I had it when I printed it to minimize the supports I would need.

Print Settings

Printer:

Monoprice Mini Select

Rafts:

No

Supports:

Yes

Resolution:

.175

Infill:

10%

Filament:

Generic PLA

Black

Category: 3D Printer Accessories

Tagi