Extension for Ikea Kallax wall bracket (#115753)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This standoff moves your Ikea Kallax wall bracket farther away from the wall, to accommodate larger baseboard trim.
- Ocena
- 5 / 5
- Polubienia
- 48
- Pobrania
- 200
- Wydruki
- 1
- Wyświetlenia
- 1928
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Decor
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This standoff moves your Ikea Kallax wall bracket farther away from the wall, to accommodate larger baseboard trim.
The basic Kallax bracket (Ikea part #115753) has two positions to negotiate baseboard trim up to about 10 mm deep. This standoff provides additional distance to the wall.
I've created it in 7 sizes: 10 mm, 12.5 mm, 20 mm, 25 mm, 30 mm, 40 mm, and 50 mm. That's the thickness of the piece representing the added depth.
Print the right one for you, and marvel as it gently snaps on to the metal bracket for ease of installation, yet pleasantly leaves enough room for the plastic cover to snugly keep it warm at night.
Important warning: I make no representations as to what materials/settings you should print this in, or if it will be safe in your environment. Do not use this in a situation where it will be under load.
I created this model in OpenSCAD and it's fully parameterized. If you'd like a different size, message me and I should be able to generate it easily.