Lower Fixture for a Hanging Lamp Shade - Pineapple Style
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Two versions of a part designed to replace a missing lower fixture on a hanging ornamental lamp shade. The V12 is 10cm…
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 28
- Wydruki
- 0
- Wyświetlenia
- 205
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution
Two versions of a part designed to replace a missing lower fixture on a hanging ornamental lamp shade.
The V12 is 10cm in diameter and about 2.5cm in height while the V13 is scaled at 70% approximately. Both are designed to have an M4 trapped nut placed during printing for mounting.
I will be adding a bracket to the part in the form of a large/thick washer which will retain this piece from the other side of the glass shade. Find a customisable washer here: http://www.thingiverse.com/thing:1099603
Print Settings
Rafts:
Doesn't Matter
Supports:
No
Resolution:
0.1 - 0.2 mm
Infill:
5 - 10%
How I Designed This
Main body was designed in 123D Design.
The Hex nut/bolt was designed using a version of a script I made in OpenSCAD - file can be found: http://www.thingiverse.com/thing:1103895
Category: Decor