Lower Fixture for a Hanging Lamp Shade - Pineapple Style
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Two versions of a part designed to replace a missing lower fixture on a hanging ornamental lamp shade. The V12 is 10cm…
- Rating
- 0 / 5
- Likes
- 8
- Downloads
- 28
- Makes
- 0
- Views
- 205
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution
Two versions of a part designed to replace a missing lower fixture on a hanging ornamental lamp shade.
The V12 is 10cm in diameter and about 2.5cm in height while the V13 is scaled at 70% approximately. Both are designed to have an M4 trapped nut placed during printing for mounting.
I will be adding a bracket to the part in the form of a large/thick washer which will retain this piece from the other side of the glass shade. Find a customisable washer here: http://www.thingiverse.com/thing:1099603
Print Settings
Rafts:
Doesn't Matter
Supports:
No
Resolution:
0.1 - 0.2 mm
Infill:
5 - 10%
How I Designed This
Main body was designed in 123D Design.
The Hex nut/bolt was designed using a version of a script I made in OpenSCAD - file can be found: http://www.thingiverse.com/thing:1103895
Category: Decor