ADXL343 Mount for Micro Swiss NG Extruder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Excuse the poor photos! ADXL343 (Cheaper than 345) mount for the new MicroSwiss NG extruder. A little overkill with…
- Ocena
- 5 / 5
- Polubienia
- 16
- Pobrania
- 66
- Wydruki
- 1
- Wyświetlenia
- 1137
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
Excuse the poor photos!
ADXL343 (Cheaper than 345) mount for the new MicroSwiss NG extruder.
A little overkill with heated inserts but hold solid to get an accurate reading.
These are the brass inserts I used: https://www.amazon.co.uk/gp/product/B09MCWTGLZ/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&th=1
You'll need:
3x brass inserts
2x M3x4mm bolts
1x M3x12 bolt
Remove the top right screw holding the fan shroud in place, use the 12mm bolt through the shroud through the mount and into the the 343 mount.
Can be left on the printer permanently if you want.
Enjoy
Print Settings
Printer Brand:
Creality
Printer:
Ender 3
Rafts:
No
Supports:
No
Resolution:
0.2
Infill:
50
Category: 3D Printer Parts