1 / 6
ADXL343 Mount for Micro Swiss NG Extruder — image 1
1 / 6

ADXL343 Mount for Micro Swiss NG Extruder

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Excuse the poor photos! ADXL343 (Cheaper than 345) mount for the new MicroSwiss NG extruder. A little overkill with…

Rating
5 / 5
Likes
16
Downloads
66
Makes
1
Views
1,138
Reviews
1

Updated at source:

Model information

License
Creative Commons — Attribution

Excuse the poor photos!

ADXL343 (Cheaper than 345) mount for the new MicroSwiss NG extruder.

A little overkill with heated inserts but hold solid to get an accurate reading.

These are the brass inserts I used: https://www.amazon.co.uk/gp/product/B09MCWTGLZ/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&th=1

You'll need:

3x brass inserts

2x M3x4mm bolts

1x M3x12 bolt

Remove the top right screw holding the fan shroud in place, use the 12mm bolt through the shroud through the mount and into the the 343 mount.

Can be left on the printer permanently if you want.

Enjoy

Print Settings

Printer Brand:

Creality

Printer:

Ender 3

Rafts:

No

Supports:

No

Resolution:

0.2

Infill:

50

Category: 3D Printer Parts

Tags