120 mm inline fan for 80 mm hose
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Adapter to run a 120 mm Fan in a 80 mm exhaust hose
- Ocena
- 0 / 5
- Polubienia
- 28
- Pobrania
- 113
- Wydruki
- 0
- Wyświetlenia
- 906
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial
I run a 120mm Fan inside the exhaust-hose of my Snapmaker-enclosure. Running a additionally fan inside the hose will improve the static pressure and therefore the airflow in longer hoses, especially when they have to go up.
Using a bigger Fan will allow you to have the same airflow on a lower rpm and therefore a more quit environment.
I used zip-ties to Fix the hose in place.
To get vibrations out i laser cut to seals (one for each side) out of
fleece and placed them between the fan and the printed parts. I guess TPU would work as well.
There are holes to fix everything together with M4 screws.