Tomahawk - Electrical Vehicle (2016 Science Olympiad)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A simple Electric Vehicle for the 2016 division C Science Olympiad.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 22
- Wydruki
- 0
- Wyświetlenia
- 395
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Engineering
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a straight driving Electric Vehicle for the 2016 division C Science Olympiad. It should be fully rules complaint but check dimensions before using this design.
Note: At time of upload, the design has not been tested in competition and has no guarantee of performance.
====================================================================
Printed Parts needed:
1x T - Battery Holder
1x T - Tomahawk
1x T - Micro Servo Mount
1x T - .25 rod holder Pt 1
1x T - .25 rod holder Pt 2
2x or 4x CD/DVD Hubs
====================================================================
Optional Printed Parts:
T - Trim Tanks
====================================================================
Hardware Needed:
20x M3 6mm Square Head Bolts or M3 6mm Wing Bolts
21x M3 Nuts
1x Continuous Rotation Micro Servo
1x Micro Controller
1x Makerbeam Extruded Aluminium Beams (300mm used in pictured cart)
1x 1' of #8-32 thread rod
4x #8-32 Nuts
2x or 4x CD and/or DVD
Category: Engineering