1 / 1
Snap-In TPU Damper feet for 2020 profile
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Reduces vibration and quiets printer harmonics!
- Ocena
- 5 / 5
- Polubienia
- 3
- Pobrania
- 64
- Wydruki
- 1
- Wyświetlenia
- 387
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 1) (Komentarze: 1)Remiksy (0)Kolekcje (10)Powiązane
I modified the original to fit a 2020 profile frame. I adjusted the dimensions to be a little taller so I don't even have to remove the original feet on my Ender 5.
Print Settings
Filament: TPU
PLA could work but there are other designs more suited for it, I think.
Perimeters: 1-2
Infill: 10-25% depending on how heavy your printer is.
On my modified Ender 5 with the power supply mounted to the back, I printed my front feet at 8% and the back at 20%.