1 / 1
Arduino Mega + RAMPS mount bracket
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a mount bracket for Arduino Mega with RAMPS, but should work with other shields too. It is intended to be…
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 92
- Wydruki
- 1
- Wyświetlenia
- 510
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a mount bracket for Arduino Mega with RAMPS, but should work with other shields too. It is intended to be mounted to a 2020 extrusion, I mounted it to my Kossel underneath the print bed. M3 threads are needed to be tapped to the Arduino mount holes. It is necessary to install the bracket first to the extrusion and only then install the Arduino with one screw and last RAMPS with three screws through the Arduino mount holes.
Category: 3D Printer Parts