1 / 1
2.5mm lift block for laser tube Omtech 60w laser
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Allows you to lift laser up 2.5mm higher
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 16
- Wydruki
- 0
- Wyświetlenia
- 270
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution — Noncommercial
My laser was low and hitting near the bottom of the entry hole for mirror 3, laser and head had not up and down adjustment so I made this to shim up the laser 2.5mm (the amount it was off.
I am sharing this since I had requests.