Liczymy pasujące modele…
This is a remake of my 70 mm PSU cover for the CHENGLIANG P360W24V used in the Sovol SV06 (https://www.printables.com/de/model/341847-sovol-sv06-psu-case-cover-for-silent-70-mm-fan-and). By using a 92 mm fan, the fan speed can be further…
Simple wall mount for the Unifi 60W power brick delivered with the Unifi Cloud Gateway Fiber. Works best in PLA due to it's rigidity, requires supports (tree is best) for the clips. Uses 2 3.5mm countersunk screws to fix it to the wall.…
A 19" rackmount for the US-8 switch from Ubiquiti. Both parts are screwed together with a screw and nut. Glue is not needed. Is best printed in PETG or a more stable material. I have used 5 perimeters. There is a cutout for the LEDs that…
I wanted to route the cables for this ( https://www.ubnt.com/unifi-switching/unifi-switch-8/ ) switch underneath. And designed a stand to do so...have fun Print instructions Category: Computer Print Settings Printer Brand: Prusa Printer:…
Falcon2 Pro Collection This is a holder for a 5V 5mW laser crosshair pointer for the Creality 22w/40w/60w laser module used to line up material on the bed for cutting accurately and set back far enough so as to not collide with the front…
This is a case cover for the CHENGLIANG P360W24V power supply from Sovol SV06, with a hole for a 70x70x10 mm fan and a step-down converter (LM2596 HW-411). There are holes for fusible nuts (M3 with 4.6 mm outer diameter). Unlike the…
A mount for the Unifi Switch 8 (US-8 and US-8-60W). The size of the switches this mount is designed for is: 150x100x30mm.
After I made the 70 mm and 92 mm Version of the PSU fan case, I got a request for a 80 mm variant from PatrickE which is exactly this one. I did not test it myself, but PatrickE confirmed that it fits and also provided the pictures, thank…
Needed a quick wall mount for a remote switch on my network.
A Unifi Switch 8 rack mount for a 19" rack. Printed with No supports 3 perimeters / walls Use the “Blende Links.stl” panel from 19" Rack Panel Hexagon Design to get the other half of the mounting panel.
Many cheap printers are using the Cheng Liang P360V24W power supply. The biggest flaw of that model is the loud fan inside the PSU. There are a few cover mods on Printables, but they all just work when the PSU facing out of the printer.…
A 2 part modular rack mount for the Ubiquiti Unifi US-8-60W switch.A 2 part modular rack mount for the Ubiquiti Unifi US-8-60W switch. This mount is part of a 19-inch modular rack mount system I designed, you can mix and match the modules…
Print two pieces (mix and match you can print 2 of the same or one each), attach the pieces with M6 bolt+nut and you have your 19" rack bracket for 6 of your POE+ adapters I print it with PETG and 0.8mm nozzle with 0.5mm layer height for…
Model for: ACEIRMC 60W 6-35V DC to USB Type C PD 3.0 QC4 Type A QC3.0 DC Fast Charge 12V 24V Step-Down Power Module USB Type-C Mobile Phone Quick Charge Adapter See: https://a.co/d/7itYbwA Component clearances are modeled as solid areas…
Anker PowerPort 5-Port USB C 60W Case Wall Mount
This is a remix of felixna's model with an added slot for the fan's cable as suggested by Thomas Albrecht in the comments of the original model. The notch is measured from a Noctua Redux fan, but it should be very similar for most fans.…
This is a rack for a Unifi 8-60W switch. I wanted a stand for the switch for my tv/media stand that looks neat from the front. This is a remix of ( https://www.thingiverse.com/thing:3446815 ). As with bigli's original, you'll need to add…
I designed this mount since I couldn't find suitable alternative for my desk.
DIN Rail Clip Mount for Unifi USW Ultra 60W This is a custom DIN rail mount designed for the Unifi USW Ultra 60W . It may also be compatible with other Unifi USW Ultra series switches. Features Attaches using the original mounting plate .…
A solder fume extractor that is repurposed from a cheap 60W nail dust collector that can be found on various online market places (keywords: 60W nail dust collector). The original device is basically kept as it is. Only an activated…
Includes .f3d and .step files so you can modify if Sabrent shipped a different power supply for your hub--see photos for the specific power supply that came with my USB hub, and fits in this holder. Holes are sized for #6 screws. Also…
These are mounting brackets for an Anker 60W 6 Port USB Charging Station. I used it to mount the charging station on the bottom side of my desk. This is the exact model that I designed it for: https://www.amazon.com/gp/product/B00P936188…
Ubiquiti US-8/US-8-60W 19" rack mount with Keystone Jack
This is a 92mm fan mod for the common Cheng Liang P360W24V power supply. The assembly requires you to have the following items: 4x M4x30 or M4x40 (with spacer) flat head machine bolts 4x M4 washer 4X M4 nut 92mm fan optional mesh for 92mm…
After evaluating by our clinicaluser we added a mountaing for a headband so that the mask would not slide down.
Project box 180x120x50, 60w PSU Designed 2021-04-25 thing:4839494 printables TOC Project box 180x120x50, 60w PSU TOC Summary Description Print Settings Buy me a coffee? Summary Electronics project box 180x120x50, designed for 60w PSU…
Power supply: based on cheap (bought used) server power supply HP-HSTNS-PL14 with output voltage raised from 12V to 13.9V (including increasing over voltage protection threshold) based on description by SP4UBW:…
A remix for a 80mm fan for a clean look The holes used for mounting are 3.9mm for small M3 heatset inserts drill to size for large ones -Needs 8 fan screws to complete -Removed buck converter -Added fan surround I used a fixed stepdown…
Rack side mount for Ubiquity 10G PoE++ Adapter (60W).
A super lightweight mini Bowens mount I made for the Andoer 60W Tri-Color video light and Ulanzi barndoors. Now I envy those who have a proper 3D scanner… PRINT NOTES Tree supports required, on print bed only. Preferably PETG or tough…
Bracket to hide the powerbrick under a table or on the side. 3.5 or 4mm screws can be used.
A mount for the Kessil A360WE Power Brick. Uses two #6 flat head screws. Easy to print, nothing special needed. Print Settings Printer Brand: Creality Printer: CR-10S Rafts: Doesn't Matter Supports: No Category: Pets
Since there is nothing here yet for the 6 port hub from RavPower, I quickly designed a holder myself. The hub fits sucking purely ;-)
This is a holder for the Anker Powerport 60w charger. User small supports under the holders.
A case for a small TDA7498 amplifier board with fuse and screw clamp holder.
This is a slip in mount for the US-8-60W Unifi POE switch with 4 holes for a Leviton panel mount. Leviton spacing is roughly 6 inches horizontal by 1 inch vertical. It has cut outs for ventilation and the grounding lug on the rear. For…
Wandhalterung für den Switch US-8-60W. Drucken mit Support notwendig. Die Ausrichtung wenn die STL geladen wird ist die optimale.
Anet A8 comes standard with 20A (240watt) PSU. Upon the stock PSU dying, a 30A (360watt) PSU was purchased to replace: https://www.amazon.com/gp/product/B00D7CWSCG/ref=oh_aui_detailpage_o02_s00?ie=UTF8&psc=1 30A PSU does not fit stock…
I designed this for the Cheng Liang P360W24V power supply, commonly offered with Creality's Ender 3 printers, for a stand-alone mount off the printer. It should fit other 'thick as a brick' printer power supplies of similar design.…
Original Design: @kbiel (https://www.thingiverse.com/thing:3208663/) During this last heat wave in California, my little USW-8-60W switches were overheating and rebooting. So I added fans to this mount. It supports the installation of 2…
This model is a 2U x 4U 1U high Gridfinity bin specifically for the Anker 60W 6-Port USB Charging Station ( affiliate link :) ). This model allows you to also stack more Gridfinity bins on top of the charger while leaving the charger…
Modified the original because my Switch bottom rubber stands were very tight and in order to fit in the stand they had to be removed, this version has half of the right switch stands removed to better fit the rubber stands, I have also…
This is a simple wall mount for the 60w model which has 6 ports. no supports needed. I've included a small cut out in the bottom for the AC port cord to plug in.
Made a simple version of the original product. Works good. STEP included for other remixes Category: Computer
I made two of these simple 60W lights to use as lights for making videos of my projects. You will need: - 30cm x 22cm piece of 2mm thick aluminium plate - 4 pieces of M3 flat head screws, 15mm length - kapton tape - 2 pieces of 2mm thick,…
I used the model from https://www.thingiverse.com/thing:2688539 in advance. There were too many parts and needed to be assembled. Moreover, due to the irregular shape of the module, it took up more space when stored, so I redesigned a new…
This is an remixed Mount, with an c14 inlet. To fit any Generic 360W PSU to the Prusa Mk3 or Mk4 Frame. I made this Mount , extra for the Prusawire! PRUSAWIRE Tak an Look at it , its an Great Project. Screws needed for the case: 2 -- M4 x…
Hast du auch Probleme mit der integrierten Kamera? Dann ist das jetzt die Lösung! Mit meiner Halterung für einen 12mm Kreuzlinienlaser kannst du das Werkstück problemlos ausrichten und dabei ist es egal, ob es flach aufliegt oder in einem…
So first let's clear things up. This light is: NOT messy job site type of work light. NOT weatherproof. NOT passively cooled. This light is for individuals who want: Natural color lighting (High CRI of 90, no color shift). Bright and…
Well, this might be the dumbest (but most useful) print I've ever designed. Long story short, I wanted a 6th Gen iPad in my kitchen to display my Home Assistant Dashboard. Decided I didn't want to put any holes in my wall, nor did I (or…
My laser was low and hitting near the bottom of the entry hole for mirror 3, laser and head had not up and down adjustment so I made this to shim up the laser 2.5mm (the amount it was off. I am sharing this since I had requests.
I find it easier to mount board on the other side of the axis that has X-axis motor – that gives more options for modding, so I designed holder for the PSU I have to be on the other side of the printer. Mirrored PSU cover for 24v 360W…
I was starting to get bored with the factory panels, and I broke one, so I planned a new one. Unfortunately with magnets I couldn't try it I will have to order it. The model itself can be easily modified by solid operations, such as…
There are guides online about what pins to bridge to turn these PSUs on. https://www.ebay.com/sch/i.html?_nkw=HP+499250 https://www.ebay.com/sch/i.html?_nkw=HP+512327 https://www.ebay.com/sch/i.html?_nkw=HP+643933
SKY TOPPOWER HD-937D 60W Soldering Station with digital display: https://www.amazon.com.au/60W-Soldering-Station-Solder-Electronic/dp/B0BN1BG11V May work for the B version, untested as I don't own it but it looks identical.…
Ender 3 enclosure If you plan to make this, I don't take any liability if you hurt yourself, working with on open power supply can be deadly. If you are uncomfortable with the PSU open, keep the lid on and install it and see if it can…
A simple mount for a raspberry pi 4 to go on the top of a power supply. Used this power supply: https://www.amazon.com/BTF-LIGHTING-Aluminum-WS2812B-LED8806-Modules/dp/B01D8FLZV6/
(WIP) – This is a work in progress, modify your laser at your own risk, I take no responsibility for damaged lasers or personal injury. There are known flaws with the system at current which I’ve listed below but it is not an exhaustive…
Dell 360W 7,4mm GaN Slim charger holder for vertical or horizontal mount. No support needed. Power adapter Info Do you like my models? Consider buying me a coffee .
UGREEN Nexode Pro 160W Travel Case (TPU + PETG) A dual-material rugged travel case designed specifically for the UGREEN Nexode Pro 160W GaN Charger (EU Version) . It features a shock-absorbing TPU 95A inner sleeve nested inside a solid…
Slight modification to my original design to accommodate the eLeaf iStick 60W TC mod. I shortened it a little from the original for faster print times. Added a single tank holder version as well. Update 11/17/2015: enlarged slot slightly…
Falcon2 Pro Collection This is a holder for a 5V 5mW laser crosshair pointer for the Creality 22w/40w/60w laser module used to line up material on the bed for cutting accurately and set back far enough so as to not collide with the front…
Topvork 6 port USB charger 60W holder mount two screws 40mm apart. Charger size 69mm x 30mm. No supports needed, print as pictured.
SKY TOPPOWER HD-937D 60W Soldering Station with digital display: https://www.amazon.com.au/60W-Soldering-Station-Solder-Electronic/dp/B0BN1BG11V May work for the B version, untested as I don't own it but it looks identical.…
A wall mount for the Ubiquiti Unifi 54V DC/1.1A 60W mini PSU The PSU is currently used for the Unifi models Cloud Gateway Fiber (UCG-Fiber) Ultra 60W (USW-Ultra-60W) Lite 8 POE (USW-Lite-8-POE) Device Bridge Switch (UDB-Switch 35w) Dream…
Mounting Brackets for Chanzon 12V 5A Power Supply 60W https://www.amazon.com/110V-220V-Converter-Lighting-Transformer-Flexible/dp/B073QTNF9F
Dell 360W 7,4mm GaN Slim charger holder for vertical or horizontal mount. No support needed. Power adapter Info Do you like my models? Consider buying me a coffee .
There are guides online about what pins to bridge to turn these PSUs on. https://www.ebay.com/sch/i.html?_nkw=HP+499250 https://www.ebay.com/sch/i.html?_nkw=HP+512327 https://www.ebay.com/sch/i.html?_nkw=HP+643933
Based off HAMMER_T's design, I had to make some more room for my banana plugs as they are bigger. I tried to incorporate it into his design, but got lazy, so I went with this simplified version. I also wanted to use less screws to…
I couldn't find a model that printed easily or without supports so I decided to make my own. This model is meant to hold the switch from the bottom and is designed to still allow access to the grounding screw should you need to use it.…
Topvork 6 port USB charger 60W holder mount two screws 40mm apart. Charger size 69mm x 30mm. No supports needed, print as pictured.
Stow your Apple charging brick underneath the desk. Fits a 60w charger.
We are using these nifty USB-C charging blocks for our Dell Pro 14 Plus PB14250 laptops for our university libraries but they are small and nice enough that we think they might "walk away" if left unsecured. This 3D print will allow use…
A wall mount for the Ubiquiti Unifi 54V DC/1.1A 60W mini PSU The PSU is currently used for the Unifi models Cloud Gateway Fiber (UCG-Fiber) Ultra 60W (USW-Ultra-60W) Lite 8 POE (USW-Lite-8-POE) Device Bridge Switch (UDB-Switch 35w) Dream…
This is a simple grip fit for the usual Hako 60W type soldering irons. It is used after the iron has been switched off/unplugged to allow it to both cool down and be safely stored, protecting the tip. It has venting holes at the end to…
This is a remix of Rauks' Minecraft Ore Lamp scaled up 200% to fit a full size 60W light bulb base and difuser. I designed a new diffuser (so it would be as thin as the original) and a new base to hold the light bulb. You need to get the…
I remixed this model to not have chamfers on the front face.
Mounting Brackets for Chanzon 12V 5A Power Supply 60W https://www.amazon.com/110V-220V-Converter-Lighting-Transformer-Flexible/dp/B073QTNF9F
I remixed 60W Electronic load case by kn-dima to create this. So credit goes to him. https://www.thingiverse.com/thing:3893633 I made walls thicker as original ones were too delicate. I also changed back vents so they can be printed…
A leg stand for LONIO 60W Charger Additional Requirement: - Hot glue
Print Setting fits on the core one bed flat. have to rotate it to fit on the bed. Printed in 0.2mm layers, 4 perimeters, 40% infill, Gyroid, Cubic, or Triangles pattern. Please let me know if you would like a version with 2 60w power…
🟥 Description / Popis **CZ:** Kompletní krabička (enclosure) pro přestavbu serverového napájecího zdroje **HP Common Slot 460W** na výkonný 12V laboratorní nebo modelářský zdroj (12V, 38.3A). Krabička je navržena tak, aby se zdroj dal…
I have remixed the mount from AM8 - Metal Frame for Anet A8 by pheneeny, thanks. I remixed to fit a 360w power supply. ORIGINAL POST DATE 29-MAY-2019 Print Settings Printer: AM8 - RatRig - MKS Gen L Rafts: Doesn't Matter Supports: No…
Original DripTip of my friend's Dripbox 160w melted down. So i designed a new one ;) 2 Variants included: -Simply DripTip -Driptip with spiral in chimney preventing juice splashing Print Settings Printer: 3DGence ONE Rafts: Doesn't Matter…
for clips are suitable wood-screws 3x10 BOM: wood screws 3x10 4 pcs Terminal connectrs XT60 female connector wires, AC plu
PSU Case to hold a 12V 60W PSU. Attached to my enclosure to provide enclosure fan and LED lighting. Plenty of room to add a buck converter to run a 5V feed for a Pi too. Printed in PETG 0.2MM Speed profile, 15% infill Screw holes M3 size
Just a simple standoff to give your 8 Port Switch some more breathing room
I really liked the mount from user @kbiel ( https://www.thingiverse.com/thing:3208663/ ) but wanted something that is printable without supports. My remix prints fine on an Ultimaker 2 without supports. The only critical part is the…
Adjustable and hideable under desk mount for Anker 10 port hub
This is a power supply box for a 12v 5A PSU. I will be using this to power LED strips on my 3D Printer. The back features a cutout for 120/240v IEC320 C14 power cable inlet(computer cable). Also a power switch is integrated. The front…
An ergonomic grip for CXG E60WT soldering iron. Really, any iron which handle is 17.8 mm in diameter and at least 44.7 mm in length. Has triangular shape with smooth corners for comfortable grip and small lip at the front to prevent…
I needed a rack mount for my desktop US-8-60W switch, and most of the models I found were for a 19" rack - which I don't have on my desk ;) I've printed https://www.printables.com/model/57512-customizable-19-rack-rails-for-audioit-gear in…
The original model moves too much when plugging cables into the switch. This remix snaps onto the switch and holds better. I also adjusted the keystone port height from 19.8 to 19.2 mm to better fit my modules. PETG, 0.3mm layers, no…
I heavily tweaked Seadevil's awesome design to move the switch to the other side of the cover as I have my PSU vertically mounted in a specific direction. Overall this design uses less plastic, less space and provides more internal space…
Designed this to mount the 60W Framework laptop charger to the wall, needed it since I printed the motherboard case for it and mounted that to the wall as well. It uses 7mm countersunk screws to mount to the wall. Charger does fit a bit…
Power Supply Cover to be used in conjunction with 360W PSU which I purchased at Banggood -…
Unifi US-8-60W skadis mount Not the prettiest but works fine! Remove the rubber from the switch otherwise it will not fit. Use T-clips for mounting https://www.printables.com/model/472294-skadis-t-clip-system-low-profile-flush-mount-clips/
Update 5-24: Added file for EU version plug. Update 2-16: Added version with slot for wall cord by request. This is an updated version of my previous Macbook charger wrap. Category: Computer
