1 / 1
Case for an ESPHome DSNK-P11 replacement module
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a very simple case for an ESPHome DSNK-P11 replacement module.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 18
- Wydruki
- 0
- Wyświetlenia
- 536
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Share Alike
This is a very simple case for an ESPHome DNSK-P11 replacement module. The module can be ordered from https://www.espthings.io/index.php/2021/08/03/panasonic-climate-wifi-interface-for-esphome-and-home-assistant/
While a custom case isn't strictly needed (as the module fits in the original case), I designed this very simple case, so I could leave the original modules untouched. Users that might not have the original DNSK-P11 modules might also want to print a case like this.
Print instructions
- 0.2mm layer hight
- Speed profile
- PLA
- Other settings will probably work fine as well
Assembly instructions:
- Connect the module to the cable, as instructed in the link above.
- Glue the PCB in the case with a few small drops of CA glue. Use a minimal amount, and the PCB can easily be removed again.
- Put the case in the unit, as you can see in the attached image.