1 / 1
Case for an ESPHome DSNK-P11 replacement module
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a very simple case for an ESPHome DSNK-P11 replacement module.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 18
- Makes
- 0
- Views
- 537
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Share Alike
This is a very simple case for an ESPHome DNSK-P11 replacement module. The module can be ordered from https://www.espthings.io/index.php/2021/08/03/panasonic-climate-wifi-interface-for-esphome-and-home-assistant/
While a custom case isn't strictly needed (as the module fits in the original case), I designed this very simple case, so I could leave the original modules untouched. Users that might not have the original DNSK-P11 modules might also want to print a case like this.
Print instructions
- 0.2mm layer hight
- Speed profile
- PLA
- Other settings will probably work fine as well
Assembly instructions:
- Connect the module to the cable, as instructed in the link above.
- Glue the PCB in the case with a few small drops of CA glue. Use a minimal amount, and the PCB can easily be removed again.
- Put the case in the unit, as you can see in the attached image.