Solder Station Tip Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Simple tip holder for solder station, holding up to 5 tips. Tip base diameter can be up to 7mm.
- Ocena
- 5 / 5
- Polubienia
- 32
- Pobrania
- 103
- Wydruki
- 3
- Wyświetlenia
- 1077
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
It was a mess with all the tips from the soldering station lying around. The solution here was a holder for the tips so they were always where they needed to be.
The holder fits my Yihua 936 soldering station, but probably others too with similar holders - Just clip on, no glue or screws needed.
Can be printed without support and elephant foot compensation in PETG and probably also other materials (PLA).
Shown model is printed in Prusament PETG Anthracite Grey.
>> If you like the model, please download and leave a like, a make or a rating - Thank You ;-)