Thru-axle truing stand adapters
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Adapters to make it easier to true thru-axle axles on a truing stand. I looked at the Park Tool TS-2TA product, &…
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 18
- Wydruki
- 0
- Wyświetlenia
- 747
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Adapters to make it easier to true thru-axle axles on a truing stand.
I looked at the Park Tool TS-2TA product, & decided I could integrate the spring & spacer piece into one overly-complicated stacked wave spring. Based on overall dimensions from the TS-2TA.
The spring spacer has a chamfer to make dropping in the adapter easier. I don't know if this would work with non-Park Tool modern truing stands.
This is untested.
How I Designed This
Credit to Barış Yazıcı for developing the quick release concave washer model (https://grabcad.com/library/26-back-wheel-single-gear-bicycle-1).
Credit to Ivica Zdelarec for developing the quick release model (https://grabcad.com/library/quick-release-for-saddle-clamp-1).
Assembly
You will need
- seatpost clamp quick-release M6 skewer (52.5 mm length - cut down & cut more threads if needed) & concave washer
- M6 nut
- spring spacer, printed
- interface, printed
to make one adapter.
I recommend small layer heights on the interface piece since it will be the contact with the hub axle.
The interface has a deepened M6 clearance hole so it can accommodate some variation in skewer length. I don't have one on hand, so I don't know what the standard length is.
If it's too long, then the spring spacer file will need to be edited appropriately.
Category: Tools