Thru-axle truing stand adapters
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Adapters to make it easier to true thru-axle axles on a truing stand. I looked at the Park Tool TS-2TA product, &…
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 18
- Makes
- 0
- Views
- 747
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Adapters to make it easier to true thru-axle axles on a truing stand.
I looked at the Park Tool TS-2TA product, & decided I could integrate the spring & spacer piece into one overly-complicated stacked wave spring. Based on overall dimensions from the TS-2TA.
The spring spacer has a chamfer to make dropping in the adapter easier. I don't know if this would work with non-Park Tool modern truing stands.
This is untested.
How I Designed This
Credit to Barış Yazıcı for developing the quick release concave washer model (https://grabcad.com/library/26-back-wheel-single-gear-bicycle-1).
Credit to Ivica Zdelarec for developing the quick release model (https://grabcad.com/library/quick-release-for-saddle-clamp-1).
Assembly
You will need
- seatpost clamp quick-release M6 skewer (52.5 mm length - cut down & cut more threads if needed) & concave washer
- M6 nut
- spring spacer, printed
- interface, printed
to make one adapter.
I recommend small layer heights on the interface piece since it will be the contact with the hub axle.
The interface has a deepened M6 clearance hole so it can accommodate some variation in skewer length. I don't have one on hand, so I don't know what the standard length is.
If it's too long, then the spring spacer file will need to be edited appropriately.
Category: Tools