Shimano Hollowtech Bottom Bracket Spacers
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
0.7, 1.8, & 2.5 mm spacers for Shimano Hollowtech II bottom brackets. The ones that came with my
- Ocena
- 0 / 5
- Polubienia
- 27
- Pobrania
- 342
- Wydruki
- 0
- Wyświetlenia
- 1248
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial
0.7, 1.8, & 2.5 mm spacers for Shimano Hollowtech II bottom brackets.
The ones that came with my
How I Designed This
http://wheelsmfg.com/bottom-bracket-spacers.html
I have my own spacers, but I used this website to make sure they were in fact bottom bracket spacers.
I ended up pulling off the dimensions from the ones I have. The OD doesn't matter as much - 40.88 mm, & 35.52 mm ID, which does matter. This ID is larger than the 1.380" = 35.052 mm specced by Wheels Manufacturing.
Assembly
http://si.shimano.com/pdfs/dm/DM-FC0002-12-ENG.pdf See page 11, or any Shimano Hollowtech II bottom bracket tech doc.
68 mm bottom bracket shell needs 3 spacers: 2 on the right, & 1 on the left, all 2.5 mm thick. If you're using a mountain crankset, that is.
Category: Replacement Parts