Minibike License Plate Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
License plate holder for my Coleman CT200U-C minibike. Mounts on 22mm diameter rack with some zipties.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 40
- Wydruki
- 0
- Wyświetlenia
- 401
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a license plate holder I made for my Coleman CT200U-C minibike. It mounts on the 22mm diameter rack with some 5mm wide zip ties. The full version was too big to print on my machine, so I cut the bottom half off the model and printed at a diagonal.
This thing was made in tinkercad.
Updates to be made:
-The inset for the plate could grow a little to accommodate slight variations in plate size.
-Could add 1.5mm high bosses around screw holes so that plastic meets metal.
-Make sexier?
Print Settings
Rafts:
No
Supports:
No
Infill:
20%
Filament:
Overture PLA Pro
Notes:
Fill pattern: 3D Honeycomb
External pattern: Octagram Spiral
Category: Automotive