2020 Extrusion Latch for Voron Fridge Door mod
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Remix of "Voron 2.4 Filament Latch" into a latch for the "Fridge Door" mod.
- Ocena
- 5 / 5
- Polubienia
- 77
- Pobrania
- 324
- Wydruki
- 4
- Wyświetlenia
- 4479
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Voron Parts & Upgrades
- Licencja
- Creative Commons — Attribution
Remix of "Voron 2.4 Filament Latch" for side panels into a latch for the "Fridge Door" mod. I hoped to make a nicer version when my CAD skills improve, but this version has worked out well.
My printer has 1mm foam gasket and 3mm acrylic side panels. (the spec was changed to 3mm thick foam gasket after mine was built.) The parts may need reworked if your foam gasket or side panels are a different thickness.
The parts are all included in the all_parts_plated stl, but I included them each separately in case something needs reworked for your application.
The GIF from the original designer shows how the parts go together after printed:
https://github.com/richardjm/voron-parts/blob/main/voron-2.4/FilamentLatch/Images/Assembly.gif
I used 2mm rod instead of filament for improved strength. (2mm rod is common for hobby model axles.) Holes may need drilled out/enlarged for both the rods and screw holes.
I did not release this previously because I didn't think it was refined enough, but I have received a few requests so here it is As-Is/No Warranty; might not work for you.