Ender3 Adapter for E3D Revo Hemera (Original/XS) v4
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I wanted to be able to print all parts in the best orientation possible so I made this Probe options: EzABL BL/CRTouch
- Ocena
- 5 / 5
- Polubienia
- 15
- Pobrania
- 144
- Wydruki
- 0
- Wyświetlenia
- 1403
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I wanted to be able to print all parts in the best orientation possible, so I made this.
My current setup is the E3D Revo Hemera (original and XS), TH3D ezABL (mini and regular), and a lot of OCD. If you use the ezABL mini then the adapters will work for this setup.
BLTouch and CRTouch Holders now available. Just pick the correct holder style and the Touch Adapter. Both holders are setup for M3x6mm nut and bolt
I have the original but have setup a plate converter for the XS too that will work with all holders. If you are you using the XS version you can use this fan duct pin made by Ionic https://www.printables.com/model/305260-e3d-hemera-xs-fan-duct-plate-stabiliser-pin
All the parts were printed in Atomic Cosmic Graphite PETG with 0.2 layer height.
Also shown in pictures is part cooling duct from https://www.thingiverse.com/thing:4042492 (unchanged). I did a full redesign (not remix) of the fan duct plate to fit this duct because (for whatever reason) I could not make the original one work. Also new version of XS compatible fan duct plate.
It should be fairly straightforward for building out your combo.
Example: If you have a CRTouch, Revo Hemera XS, and want wiring to go back behind the extruder. Download the following:
- Carriage Plate - XS
- XS Fan Duct Plate
- Wire Holder - Back Feed
- Touch Adapter
- CRTouch Holder
You will still need to download the above fan duct.
If you like my design you can always Buy Me A Coffee