Vacuum Adapter for Bosch Devices
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Adapter to connect Bosch devices with the Bosch-specific Click and Clean connector to Makita vacuum cleaners
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 108
- Wydruki
- 0
- Wyświetlenia
- 1236
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Update
If you use the osVAC system, have a look at the similar osVAC compatible adapter I made that you can use to connect Bosch Click and Clean devices to the osVAC system here: https://www.printables.com/model/1054109-osvac-adapter-for-bosch-devices
Description
This is an adapter to connect any Bosch device with the Bosch-specific Click and Clean vacuum socket to a Makita vacuum cleaner.
The outer diameters are 45 mm on the device side and 38 mm on the vacuum cleaner side.
Please use the larger end piece accessory (38 mm inner diameter) to connect your Makita vacuum cleaner.
Printing
Alignment for the print is with the Bosch side facing the print bed. The print is in PETG.
The adapter has a quite snug fit on the device to make it quite air-tight . If you do not expect any shrinkage, you should perhaps scale it to 99% and a bit.
The adapter features (only) a 45° angle so that you can print it without any supports. I just recommend support for the two small elevations on the side that fit into the wholes of the Click and Clean socket.
Update: I have created version 2 of the model which features chamfers at the elevations, so that you should be able to print the model without any supports.
Model
Please find in the downloads section also the CAD models (Fusion 360), so you can adapt the model to your needs and tools.
Feedback
Feedback? Ideas for improvements? Please leave a comment or drop me a message.