1 / 1
Ender 3 Dual Gear Direct Drive Briss Fang Adapter
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Adjusted to fit the hictop dual gear extruder.
- Ocena
- 5 / 5
- Polubienia
- 9
- Pobrania
- 61
- Wydruki
- 1
- Wyświetlenia
- 943
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution
The dual gear extruder has the tubing adapter 10mm higher, so I moved the motor mount over to compensate.
Other things adjusted:
- Added a hole to be able to adjust the gear tension spring
- Moved cable chain mount over and up a bit to interfere with the motor wires less
last time I printed it vertically, but the cable chain mount broke. This time I printed it laying on its side.