Coverstrip V-slot 2020/2040-frame
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Another cover for 2020 or 2040 frame. Keeps the dust and debris out of the V-slot. The top of the cover is as high as…
- Ocena
- 5 / 5
- Polubienia
- 19
- Pobrania
- 198
- Wydruki
- 3
- Wyświetlenia
- 813
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
Another cover for 2020 or 2040 frame. Keeps the dust and debris out of the V-slot.
The top of the cover is as high as the top of the frame, so it can be slid under mounted parts. Sometimes with a bit of persuasion.
There is more than enough room for possible cabling.
The part itself is designed as light and cheap as possible.
I added a basic cover of 100 mm length, you can scale it in your slicer (X-axis) to the right length.
Also added is a complete set of covers for the under-frame of the Tevo Tornado (4x275 (sides front), 4x175 (sides back) and 4x188 mm (front and back)). A second set is added for the 500 mm long 2040-frame for the Y-carriage (2x275 and 2x225 mm). It can be covered without any technical problem.
The covers are light enough to cut to size with a filament cutter when they are too long.
Happy frame-covering :)
Print Settings
Printer Brand:
TEVO
Printer:
Tornado
Rafts:
No
Supports:
No
Resolution:
0.3 or 0.2
Notes:
I sliced them with 10 walls/perimeters. Of course there is no wall with that thickness, but it gives a nice smooth top and a nice quit print without shaking. You can also set your speed pretty high cause there are only straight lines.
Category: 3D Printer Parts