1 / 6
Anycubic Mega X PSU Custom Cover 92mm Quiet Fan — zdjęcie 1
1 / 6

Anycubic Mega X PSU Custom Cover 92mm Quiet Fan

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Anycubic Mega X PSU 92mm Quiet Fan Cover

Ocena
5 / 5
Polubienia
18
Pobrania
131
Wydruki
0
Wyświetlenia
927
Oceny
2

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Accessories
Licencja
Creative Commons — Attribution

All the common PSU custom covers for the Anucubic I3 Mega that can fit a 92mm quiet fan are not compatible with the slightly longest PSU found in the Mega X, so this cover solve the problem.

It can be attached with the original screws to the PSU and to the fan with the provided silicon mounts.

The main structure is 2mm thick while the lateral mounts are 2.5mm. A bit more thickness ensures less stress on the whole piece due to fan vibrations and a good heat deformation resistance, being this meant to be printed with PLA.

The height of the structure ensures the correct fit of a 92x14mm fan.

Designed in Fusion360

Category: 3D Printer Accessories

Tagi