Super glue replacement tip with cap
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I use super glue all over my shop and the tips get clogged and I have to either unclog them or cut the tips lower and…
- Ocena
- 5 / 5
- Polubienia
- 70
- Pobrania
- 661
- Wydruki
- 6
- Wyświetlenia
- 2193
- Oceny
- 7
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution
I use super glue all over my shop and the tips get clogged and I have to either unclog them or cut the tips lower and get a bigger hole. This was such a pain that I decided to sit down and 3D model a replacement tip and cap.
The example photos are printed out of PETG white for the base and PLA black for the cap. You can use whatever you want but I liked the black and white and it was what I had loaded on my printers when I designed this.
The tip does not need any supports but I recommend a raft for the cap. It fits perfectly when printed at .3mm layer height. The cap does snap on and I recommend using vaseline to keep the glue from sealing the bottle shut in time.
Enjoy and let me know if you have any issues.
Print Settings
Rafts:
Yes
Supports:
No
Resolution:
.3
Infill:
10%
Notes:
Only the cap needs a raft, its a small point and will fall over without one.
Category: Parts