Spool Holder Attachment
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This assembly attaches to the stock standard Prusa Spool Holder Arm Support, allowing for the installation of bearings
- Ocena
- 0 / 5
- Polubienia
- 18
- Pobrania
- 46
- Wydruki
- 1
- Wyświetlenia
- 850
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Share Alike
This assembly allows the assembly of standard sized bearings and adapts to the standard Prusa Boom arm that clips to the metal frame. Mounted spools spin freely with the bearings.
The retention posts are designed to allow flexibility relating to spools of material used. The retention posts have graduated ridges of different diameters from 34 to 60mm in 2mm diameter increments. Spool holder also allows for spools up to 80mm wide.
Inspired by many community spool holders that include bearings. Not perfect, but perfectly good.
Best Regards
Additional Parts needed:
1x 3" Bolt, designed for US Size #10-24 *
1x Bolt Nut, designed for US Size #10-24 *
2x Bearing, used uxcell 12x24x6 mm
*(sorry for mixed units, this is out of convenience of local hardware, but hole can be edited)