64oz Glass Water Bottle Handle Fix
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Bottle handle started to slip off, so this is a better designed handle meant to keep you from having to buy new bottles.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 12
- Wydruki
- 0
- Wyświetlenia
- 222
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Public Domain
Bottle handle fix for 64oz glass water bottle. I would recommend printing in a strong filament, such as PC/ABS. The bottle cap insert is what interfaces with the inside of the bearing/bottle cap and the handle fix interfaces with the outside of the bearing. Bolts just keep the setup together and you can take off the handle if needed with a little bit of force. Even with a shake test, the handle will not come off, so it's quite securely mounted.
You will need 2 M4x14 bolts + washers, M4x10 inserts, and 608 bearings. I installed the heat insert with the cap insert and bearing already assembled on the bottle cap. 2 bottle cap inserts will need to be printed as well. Printed at variable layer height and 50% infill, however this depends on the rigidity of the material. You want an infill amount such that the handle has a bit of flex so it can be taken on and off.
Bottle: https://a.co/d/20C6460
Inserts: https://a.co/d/9pOCHZH
Bolts: https://a.co/d/aKdWqkU
Bearings: https://a.co/d/7rAdqXL