64oz Glass Water Bottle Handle Fix
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Bottle handle started to slip off, so this is a better designed handle meant to keep you from having to buy new bottles.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 12
- Makes
- 0
- Views
- 223
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Public Domain
Bottle handle fix for 64oz glass water bottle. I would recommend printing in a strong filament, such as PC/ABS. The bottle cap insert is what interfaces with the inside of the bearing/bottle cap and the handle fix interfaces with the outside of the bearing. Bolts just keep the setup together and you can take off the handle if needed with a little bit of force. Even with a shake test, the handle will not come off, so it's quite securely mounted.
You will need 2 M4x14 bolts + washers, M4x10 inserts, and 608 bearings. I installed the heat insert with the cap insert and bearing already assembled on the bottle cap. 2 bottle cap inserts will need to be printed as well. Printed at variable layer height and 50% infill, however this depends on the rigidity of the material. You want an infill amount such that the handle has a bit of flex so it can be taken on and off.
Bottle: https://a.co/d/20C6460
Inserts: https://a.co/d/9pOCHZH
Bolts: https://a.co/d/aKdWqkU
Bearings: https://a.co/d/7rAdqXL