NZ/AU Light Switch Cover
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A simple light switch cover to prevent smart bulbs being turned off.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 36
- Wydruki
- 0
- Wyświetlenia
- 455
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Are you tired of your wife, husband, kids, burglars, flatmates, neighbours or goldfish turning off your lights thinking they're being energy conscious?
have you debugged a light bulb not showing up in home assistant for 2… whole... hours… when you just needed to flick a switch to remedy the problem?
Well then I have the 3D print for you!
This is a simple light switch cover to fix that problem. I've designed it to replace a standard NZ/AU switch face cover with some Bluetac for extra security. I've even tested it slapping over an older light cover. it should also neatly hold a Philips Hue dimmer as shown.
I did my print at 0.3mm for speed and in PLA for pretty (I have far more colours). any layer height or material can be used.
Hope this helps out my fellow Kiwis and my Aussie bros over the ditch <3
