U.S. Coast Guard - Petty Officer Insignias (NCOs)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Enlisted rank insignias of the U.S. Coast Guard, NCO Addition. These designs are in two parts for the Mountable Shield.
- Ocena
- 5 / 5
- Polubienia
- 22
- Pobrania
- 169
- Wydruki
- 0
- Wyświetlenia
- 499
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Art & Designs
- Licencja
- Creative Commons — Public Domain
These designs were made with a flat-back surface to be wall mountable. The height of these designs, while laying on it's back, is 8 mm with the width at 100 mm. You can resize/rescale it for your printing pleasure.
You can choose between, for each rank, either the Whole or Split version.
I decided to split the rank design because I wanted the shield to be a different color from the bottom chevron. Kind of like the actual collared version rank, right?! By aligning the key-whole (male/female end) on the back of the shield and on the mount base on the chevron, it is self-centering thus making it a complete rank! (See Pictures)
I Recommend using the “Z Hop - Retraction” when printing the shield. The following settings for retractions on this design are from Ultimaker's - Cura Slicer:
Print Travel: *Please note, the setting below may increase your print time!**
Enable Retractions: Yes
Retract at Layer Change: Yes
Avoid Printed Parts While Traveling: Yes (This helps a little to avoid Stringing)
Z Hop When Retracting: Yes
Z Hop Height: 0.2
Much love to my Guardians out there, who are always on call and always ready to save the day!
I hope you all enjoy and have fun with the designs!