1 / 5
U.S. Coast Guard - Petty Officer Insignias (NCOs) — image 1
1 / 5

U.S. Coast Guard - Petty Officer Insignias (NCOs)

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Enlisted rank insignias of the U.S. Coast Guard, NCO Addition. These designs are in two parts for the Mountable Shield.

Rating
5 / 5
Likes
22
Downloads
169
Makes
0
Views
499
Reviews
1

Updated at source:

Model information

License
Creative Commons — Public Domain

These designs were made with a flat-back surface to be wall mountable.  The height of these designs, while laying on it's back, is 8 mm with the width at 100 mm.  You can resize/rescale it for your printing pleasure.

You can choose between, for each rank, either the Whole or Split version. 

I decided to split the rank design because I wanted the shield to be a different color from the bottom chevron.  Kind of like the actual collared version rank, right?!  By aligning the key-whole (male/female end) on the back of the shield and on the mount base on the chevron, it is self-centering thus making it a complete rank!  (See Pictures)

I Recommend using the “Z Hop - Retraction” when printing the shield.  The following settings for retractions on this design are from Ultimaker's - Cura Slicer:

Print Travel:  *Please note, the setting below may increase your print time!**

Enable Retractions:  Yes

Retract at Layer Change:  Yes

Avoid Printed Parts While Traveling:  Yes (This helps a little to avoid Stringing)

Z Hop When Retracting:  Yes

Z Hop Height:  0.2

Much love to my Guardians out there, who are always on call and always ready to save the day!

I hope you all enjoy and have fun with the designs!

Tags