2,117 models
upd: new print profile (0.15mm) increases the print time but greatly improves reliability. It all started with the paracord keychain I had before I've got my hands on a 3d-printer. For the first several weeks after getting one I've been…
Screwless Snap Assembly. Start with base or bottom case, remove ssd and drop Pi4b board into bottom case so that it rests in provided IO openings correctly. Fit should keep board in place even with a little shake. Place…
Model description Concorde was the first commercial supersonic passenger airplane, built jointly by aircraft manufacturers in Great Britain and France. From 1976 to 2003, it halved the time it took to cross the Atlantic Ocean by flying at…
This model of the iconic Bronco has working suspension and wheels that spin, doesn't require any support material and comes preassembled right off the buildplate. The only thing you have to do after printing is to snip off a few tiny…
If you like my work and want to support me bringing you new content please consider supporting me on Patreon https://www.patreon.com/FotisMint Pre-Supported .stl and .lys files for resin included by Charro Zuck support services.
EC11 Rotary Encoder knurled knob, 6mm inner diameter A new set of 18mm diameter designs can be found here: REK 18 Updates 21.01.2024 - Added 18mm version. reworked the models and adjusted shaft dimensions for a (hopefully) better and…
"Boa Hancock, brought to life in a 3D printable statue/figurine. This rendition is an enhanced version of the previous model, where I've focused on fine-tuning the details and perfecting the pose. I'm excited to present the results of…
A bust of Abraham Lincoln. I sculpted this in Blender using images of the Lincoln Memorial as a reference.
The Concorde was a supersonic airliner that was produced by British Aircraft Corporation and Aerospatiale. It was introduced in 1976 and was used for 25 years by British Airways and Air France, until July 25, 2000, when a Concorde ran…
A wall mount for the lego concorde. This will present the concorde with the following angles. Rotated 45 degress on the Roll axis. Rotated 15 degress on the Pitch axis. Rotated -10 degrees on the Yaw axis.
The Concorrde airplane model with stand. Length 42cm, span 17,5cm (after size reduction 85%). Print instructions Infill of airplaine parts 5%, stand 100% for weight balance. Layer height 0.1mm. Supports recommended.
Recently, for some unknown reason, a lot of people have been questioning and obsessing over the idea of using stupid high CPR encoders. If you're one of those, consider this: If you do the math for 4096 CPR that is 1024ppr, that means one…
Inspired by the flowing lines of muzi's H1 case , my case allows for the following components to be used in your Meshtastic setup: BME280 module for reporting temperature, humidity, pressure, air quality, ... Buzzer for audible…
If you like my work and want to support me bringing you new content please consider supporting me on Patreon https://www.patreon.com/FotisMint Pre-Supported .stl and .lys files for resin included by Charro Zuck support services.
Unleash the terror of Jabba's palace with this highly detailed 1:24 and 1:48 scale Rancor 3D Print Files. Crafted with meticulous attention to detail, this fearsome creature from the Star Wars universe will tower over your miniature…
Original file from MeowCha on GrabCad: FN FAL | 3D CAD Model Library | GrabCAD The OG file was just one big stl file. I separated all the files on this one and exported each of the parts. I also included an f3d file of the original file…
Purpose: Tool for lubricating LM8UU bearings with a 85g tube Super Synco Lube DE21030 synthetic grease and a screw cap. Are you looking for the same tool with screw cap for the original prusa grease tube? Look here:…
A simple wall mount for the Lego Concorde Simply hang the mount with 4 standard wood screws and enjoy the beautiful Concorde Print settings: 5 perimeters 40-50% infill ABS+ Filament
An open-source connector system, designed specifically for openGrid . I asked David's permission to use the name "openConnect", and I hope this can become openGrid's official connector system. This model page includes openConnect slots,…
Circuit de Spa Francorchamps, Stavelot, Belgium, on a stand with it's name. Race track 3x3 mm Stand 198x3x15 mm Gap for putting the track into the stand 0.1x0.1 mm bigger so it's easier to assemble. Looks best when separate parts printed…
D-Shaft Knob for Potentiometer/Rotary Encoder. Please remember to press Like if you download.
This is an accessory for your Baratza Encore. It fits snugly into the grind bucket area and allows you to lean the portafilter and grind directly onto it. It also has a little tray that catches (most) of the grinds that overflow, so that…
This simple trash bag dispenser is designed to seamlessly integrate with the openGrid system using openConnect slots for mounting. The default diameter of 54 mm is chosen to leave a small gap between adjacent dispensers when mounted side…
Model from https://cults3d.com/en/3d-model/art/funco-max-stranger-things
This is a complete set of Lincoln Log compatible parts. included are: 1 notch log 1 notch log base / half 2 notch log 2 notch log base / half 3 notch log 3 notch log base / half 4 notch log 4 notch log base / half Chimney Roof supports 3…
Baratza burr holder remixed from johnyz's design (https://www.thingiverse.com/thing:1731803) I've made some modifications to make it easier to print, and in the process of that redone the scad file to make it easier to modify. Changes to…
This is an adaptation to work with my specific rotary encoders. Inner diameter is 6mm and 11mm. The encoders I used are 5.95mm in diameter so dial in your horizontal expansion settings. Encoders:…
A knob with knurled surface for EC11 Encoders. Versions both for 6mm round axle and D shaft are included. Prints well on an FDM printer with 0.1mm layer height. Print with shaft side downwards. Ironing of the top surface is recommended.…
Prusa Affiliate link: http://www.prusa3d.com/#a_aid=3090 Feel free to check out my website https://www.ar3dprints.com/ All print information is included in a txt file. Hope you enjoy!
UPDATE: I have moved on to type-2 MMUs, and will not be developing this further. Check out DWTas' EMU and Crossbow Cutter projects. The TradRack (closed beta at the moment) has amazing, robust hardware. An encoder coupled with, say, the…
I had problems with inconsistent layer lines so I developed this extrusion inconsistence test. Toolhead moves between two towers also testing retraction. Works best on white filament. Support You can support me by liking and downloading…
Useful to model off of, not perfect but is dimensionally accurate.
A simple holder for AS5600 magnetic encoder that can be used with a NEMA17 motor. Details here : https://community.simplefoc.com/t/simplefoclibrary-support-for-stepper-motors/137/42 Category: Engineering
A flat wall mount for the Lego Concorde set (10318). The pin is angled so the Concorde won't slide of the mount. Fixed using countersunk 3,5x20mm screws.
The Rockwell OV-10 Bronco was built as a light attack and observation aircraft and renowned primarily for its Close-Air Support capabilities. It is capable of carrying over 3000LB of external munitions, along with internal space for…
If you appreciate my work and like it, you can buy me a coffee ;) but this is absolutely not expected. Short introduction: The alignment of the magnet and encoder is the most critical factor for the mechanical precision of the steering…
This is a keychain for anyone that is a fan of Ford Broncos and the new grill/logo setup.
Rotary encoder knob, diameter 20 mm, optimized for KY-040
This is a faithful reproduction of the Circuit de Spa-Francorchamps. Its dimensions are 20cm long, 12cm tall, 3mm thick and the track width is 5mm, but you can scale up or down any dimension to suit your needs. As it is a simple model, it…
!!!Tell me what styles you like the most!!!
I felt like the Hexadidg was a lil small and would take up too much filament so I removed the outer shell and split it in half, made a retaining collar to connect the two and give it structure, and made a mouth piece for it. Everything…
Print twice off here. One is huge and loose, the other is works okay but a tad too deep for the switch to trigger correctly. So took the chance to design my own while learning how to knurl with Fusion360. I hollowed out the center a bit…
For the latest STLs and CAD files, please check the Github repo: https://github.com/alexyu132/encore/ Encore This is my latest CoreXY design. It's a small printer with a 120x120x120mm build area. The total size is slightly smaller than a…
This is a knob for the cheap rotary encoders (eg KY-040) with 6mm diameter, D shaped. Depending on your printer, settings, tolerances etc you can add a drop of hot glue for better fixation. The cross on the bottom is to help with bed…
My smallest tray ever! Having an excellent organizer, one thing that annoyed us was sorting each time the district tokens and how the little towers could fall on the board. Well, a solution! Print this, use the lid to store them securely…
There are two different solutions here, a geared solution and a belted solution The gear solution worked well for me originally but turns out my motor wasn't fully concentric so the gears would fail to mesh and lose encoder steps causing…
A simple holder for the AS5600 magnetic encoder. The boards press fits into the the holder. It uses the mounting holes already on the stepper motor. Printing downloads 0.2mm layer height No supports required
A housing for the cheap 1.3'' OLED Display (SH1106) with Encoder EC11 like you find them on Aliexpress: https://s.click.aliexpress.com/e/_c37Z1MCx The housing is designed to take up the least amount of space. It is designed to work with…
I created a simple screencover for the Ender 2 Pro to make it dark at night. Its a tight fit so it wont vibrate during printing. It prints without supports flat on the build plate. The "Winged Rotary Knob" by HiddenP56 works perfetly…
This is an insert / organizer for Unconscious Mind in the Kickstarter Collector’s Edition box with all the released expansions to date (November 2024). It supports premium sleeves, vertical storage, has no lid lift, and was designed to…
Printed with Prusa PLA at 0.15mm and vase mode
Technical information for all model files : Nozzle size: 0.4 mm, no Input shaper Layer height: 0.2 mm (Quality) Materials used: PLA/PETG Printer used for prototyping: Prusa MK4 Type of bed used for prototyping: Textured Notes : All…
I was thrilled by Reven's Portafilter holder for Baratza Encore but I found my portafilter was too small, tweaked the design of the holder piece to fit it. Go get the other parts from their project!
An Encoder knob for the EC11 D shaft & Plum shaft. Has a slight radius on the top, and vertical knurling on the sides. Designed for 15mm D shaft and 15mm Plum shaft, however will work with 20mm shaft also. Height = 15.5mm Diameter =…
Pequeña ruleta con 7 separaciones en blanco para poner lo que sea, usa un rodamiento o bearing 608 para poder girar libremente English Small roulette with 7 blank spaces to put anything, use a 608 bearing to rotate freely
Doesn't include electrical tracing, and some of the internal gear details but is dimensionally accurate so a good reference to work with for modeling.
(Every file is x1, print once - for each file name - unless otherwise marked. (The .3mf and .stls are the same thing for each file name, with or without lettering objects for multi-color; you don't need to print both! Instruction PDFs…
Lincoln Memorial in Washington DC UPDATE: 1/28/23 Fixed some issues with the bottom model, (now version 3), and changed the columns to this thing https://www.thingiverse.com/thing:2859447 UPDATE: 1/21/23 I have redone this model so it…
Our Ikea Livboj chargers are scattered all over the house, and they take up a lot of desk real estate while rending the phone unreadable in it's horizontal position. This is a simple print, needs no support, and the power cable to the…
made to fit those Keycaps shown in cover: Choc keycaps
The Concorde, a supersonic aircraft developed by the British Aircraft Corporation and French Aérospatiale, first took flight in 1969 and entered commercial service in 1976. Capable of reaching speeds over 2.2 Mach, it halved the typical…
Self-Customizable Sign for Labeling This blank sign is designed for you to personalize and label as you need! You can add your own text in several ways: After Printing: Simply write or draw on the sign with a marker or pen. Before…
Rancor Happy Birthday Steve. if you want more detail download the .obj file.
Summary This fits rotary encoders with knurled-type shafts. My Voron v0.1 screen didn't have the standard notched type of shaft, so I made this knob for it. I think it fits the Voron aesthetic well. It's wide and low profile, so that…
After building the LEGO Concorde, I had nowhere to put it. At just over a meter long, it needed to go on the wall. So, I designed this mount to both get it off of the table, and to display it at a dynamic angle where you are able to…
Printing Recommendations: Use adaptive layer heights (up to 0.2mm max) for optimal surface quality and faster print times. Tree supports recommended for clean and easy support removal. Components: Heltec LoRa32 V3 NEO-6M GPS Module…
Caps made to fit EC11EBB24C03 dual concentric rotary encoders. https://s.click.aliexpress.com/e/_ApgPhJ
I want to print higher temperature materials, minimise warping, failed prints and contain the gases released by those materials. This is my build log to enclose my modified Creality Ender 3. One motivation for this project is to gain…
Printable high clearance links for the Axial SCX24 micro crawler platform Works well with both stock and custom chassis I developed these high clearance links for my Axial SCX24 Basecamp, but they should also fit the C10, JLU, and Bronco.…
This is a insert for the Civlization - A New Dawn and Terra Incognita expansion. It fits both the base game as well as the expansion into the base game box. It does not fit sleeved cards, but the step files are provided to make…
🇺🇸 Welcome to Washington D.C.! Continuing with the project of recreating the National Mall in Washington D.C. for the MiniWorld3D catalog, here is the Lincoln Memorial , designed by Artemio García . We hope you enjoy printing this model.…
The usual situation … the maker's solution … Weekend, shops are closed, ordering takes too long …. This time I needed a knob for a potentiometer in a front panel. Compartment for knobs didn't contain any 4mm axis knobs … so let's make it.…
Just a way, waaay taller version of the Sister style Dummy 13 shoe by JoLam. You can either use the standart toes or the ones from Sister. it is symetrical so no mirroring required, plus it prints fine without supports. Now with a version…
A charging mount for the Shokz Opencomm/Opencomm2 headphones. The original charging cable fits securely in the mount and gives a flat surface to mount using double-sided tape or 3M Command Strip. Allows the charger to be hidden behind a…
Got allways sun on the screen. With this cover it is a lot better and i can see the navigation system without moving around. THE MOBILEPHONE HOLDER FROM FIAT IS NOT WORKING ANYMORE WITH THIS COVER Print in ABS / ASA / PETG/ PC or FlexFill…
I made my own Bronco Sport Key Holder for the gap between the cup holders. I would print at least PETG, if not ASA or ABS. Print Settings: 15% infill .2 layer height
I remixed the fanconnector as it was too small for my WinSinn 5015 fan and my part cracked upon insertion of the fan.
Mount for magnetic encoder ,module with AS5600 , use a 608 bearing .
Inspired in the new Ortofon Concorde MK2 model. Use the model with guide if you can, depends on if the broken finger lift has left a hole.
Borrowed the idea and design from https://www.thingiverse.com/thing:3270320 but I couldn't make the switch stay in place very well so I designed an inner housing + lever that fits in place of the existing knob. This fits my Baratza Encore…
This Encode Disc is tested with the panBot. https://www.prusaprinters.org/de/prints/127617-panbot To find out how far a robot has to travel, you can use an encoder disc. This has a certain number of grids (here 12 and 20) with the help of…
This is a knurled rotary encoder knob with a 38 mm diameter and 13.4 mm height. Interior chamfered edges add strength without too much excess material. I created this for a specific project I'm working on, but it should be useful for…
Simple housing case with Snap-fit for KY-040 or similar Rotary Encoder. It has a hole in a cover for easy mounting under a desk or anywhere else with a screw. Easy access to the 5-pin DuPont connector. KY-040 Rotary Encoder Module Spacing…
This is a Wallmount for the LEGO Concorde. Screw holes are 4.5mm diameter. Nothing else needed to mount. Around 15% infill is enough.
Download version 1.5.4 or 1.5.6 of the RTCLib library on github (link can be found as a comment in the Arduino file of this project) since there is a bug in 1.5.5 for the time being. It all started with the simple conclusion that I was…
Snap on roof rack for Traxxas TRX-4M Bronco.
Designed a simple pipe coupler that uses 6x3mm magnets it has 8 magnet holes, allowing to place magnets however you like, the magnet hole has enough room to fit the head of an M3 bolt, so you can also screw couplers together or screw them…
This ring is a simple tool to encode or decode text using a simple shift cipher, also called Caesar cipher. See this Wikipedia article for details. It has an additional ring with the letter numbers. The middle ring can be freely rotated,…
Inner and outer knobs for TC Electronic G-Major 1 and Triple-C devices. Possibly to fit other devices from TC. Inner knob has clearance versions. Every 3D printer has different possibility about precision, so I created clearance files…
INFILL 20% SUPPORTS NO SUPPORT MASTER GADGET BY LIKING IT AND DOWNLOADING IT
A nice little encoder knob 2 Versions: D shaft - 6 mm diameter, 10 mm deep Round shaft - 6mm diameter, 8 mm deep (fits ender 3)
I didn't like how long RTM's keychain took to print, so I got rid of about half of the links to make it shorter! It's still a neat design that works great as a keychain. I printed mine with a raft to make sure all the little pieces don't…
This highly detailed 3D printable model represents Boa Hancock, one of the most iconic characters from the anime and manga One Piece. The figure is designed in a full-body pose, capturing her elegance, confidence, and distinctive beauty.…
This is my version of the display strand for the TRX4m. I've added a small tray between the axles for screws or small accessory pieces. It's available for the Bronco and Defender with matching text on the side.
Have you ever stared at your clumsy meat mittens and thought, "you know, what I need here is a thicc rotary encoder knob". Yeah, probably not, but I did and made a couple that came pretty close to what I was looking for. These will clear…
This is a remixed longer chain, tested and working. I'm willing to trade a little time post-processing in return for certainty of print success, so I use a brim for my long chain prints. After removing the brim, I like to sand and wash…
