1 / 2
Radial Fan Air Intake - Fits any 5015 Fan
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The primary purpose of this remix is to remove the requirement for glue.
- Ocena
- 4,75 / 5
- Polubienia
- 74
- Pobrania
- 347
- Wydruki
- 9
- Wyświetlenia
- 1707
- Oceny
- 8
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 9) (Komentarze: 13)Remiksy (0)Kolekcje (108)Powiązane
I wanted to mount the air intake without gluing it to the fan. According to the author of the original model, it increases airspeed by 10%! But most of all it just looks cool! It snaps right on the screws.
I recommend printing it in 0.1mm for a smooth curve surface.