Computer Case Front Panel Standoff
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
PC case standoffs to space the face from the case for better ventilation.
- Ocena
- 5 / 5
- Polubienia
- 14
- Pobrania
- 121
- Wydruki
- 1
- Wyświetlenia
- 1597
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial
UPDATE*** 6/14/20
I created some custom gap fillers (wip) to go along with these.
I noticed my new computer was running really hot when gaming, and I assumed the lack of air intake on the front panel was the culprit. After I removed the front panel entirely, the temps dropped by ~15 degrees.
However, I didn't want to just leave the front panel off the computer, as it completes the look. And I didn't want to modify the panel by drilling or cutting holes.
I designed these standoffs because it's a reversible modification. They put the panel 30mm off the chassis.
My case is an IBUYPOWER Element MR, though, I'm sure these will work on any other case that has a similar front panel with 10mm holes on the chassis and push-in clips on the front panel. And I believe this case is based on an NZXT case.
I did not necessarily need all 8 to hold the front panel, I just used all 8 so I wouldn't see the other unused pins on the panel showing.
I may come back in the future and add something a little more stylish to complete the mod. Stay tuned.
I imagine these would look really nice, almost stock, with an SLA printer.
Here are the Cura print settings I used, but you can modify however you like:
-Super Quality (As named in Cura - Low quality for me would not print correctly on my Ender 3 Pro)
-100% infill
-Tree supports enabled
Print Settings
Printer Brand:
Creality
Printer:
Ender 3 Pro
Rafts:
No
Supports:
Yes
Infill:
100
Filament:
Black