1 / 1
T-Nut For 3030 Extrusion | T-Slot-Nut All Plastic
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This T-nut does not require a hex nut or brass insert, as the bolt is screwed directly into the plastic.
- Ocena
- 4,971 / 5
- Polubienia
- 685
- Pobrania
- 3038
- Wydruki
- 39
- Wyświetlenia
- 8510
- Oceny
- 34
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution — Share Alike
SzczegółyPliki (4)Wydruki i komentarze (Wydruki: 39) (Komentarze: 40)Remiksy (2)Kolekcje (1103)Powiązane
This T-nut for 3030 extrusions doesn't require a hex nut or brass insert, as the bolt is screwed directly into the plastic. T-nuts for classic hex nuts often have the problem that they are weakened by the thinner plastic or one often pushes the nut out the back when screwing in.
For simple applications, the plastic thread is totally fine.