1 / 4
2.5" shop vac (male) to 1.625" (1⅝") threaded hose fitting
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Standard shop vac connection that will work with most house vacuum hoses, and the smaller popular Ridgid "car kit" hose
- Ocena
- 5 / 5
- Polubienia
- 27
- Pobrania
- 227
- Wydruki
- 1
- Wyświetlenia
- 1356
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution
SzczegółyPliki (3)Wydruki i komentarze (Wydruki: 1) (Komentarze: 1)Remiksy (0)Kolekcje (54)Powiązane
PETG or harder recommended. No supports needed if you print thread side up, but I used a brim for stability.
This thread works with many (most?) household vacuum hoses. I harvested an old Eureka hose (the black one pictured), an ancient whole house vac hose (the white one), in addition to the Ridgid shop vac “car kit” hose, and it seems to work well for all of them. It will fit almost any vac hose with a 1⅝" outer diameter (41–42mm).