1 / 2
DeWalt DWS779 Miter Saw to 1.625" (1⅝") threaded hose fitting — zdjęcie 1
1 / 2

DeWalt DWS779 Miter Saw to 1.625" (1⅝") threaded hose fitting

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

DeWalt Miter Saw vac port that will connect to most house vacuum hoses, and the smaller popular Ridgid "car kit" hose.

Ocena
4 / 5
Polubienia
10
Pobrania
82
Wydruki
2
Wyświetlenia
1199
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Tools
Licencja
Creative Commons — Attribution

Will likely work with more DeWalt miter saws than the DWS779 I have, but YMMV.

PETG or harder recommended. No supports needed if you print thread side up, but I used a brim for stability.

This thread works with many (most?) household vacuum hoses. I harvested an old Eureka hose (the black one pictured), an ancient whole house vac hose, in addition to the Ridgid shop vac “car kit” hose, and it seems to work well for all of them. It will fit almost any vac hose with a 1⅝" outer diameter (41–42mm). 

For the other end of the hose, you may want: https://www.printables.com/model/325157

Tagi